​How to identify the material of the overall wardrobe in Dongguan?

1. Board material: The surface composition of the board is melamine finish, no paint is required, the surface is fine, the structure is flat, the texture is hard, mothproof and flame-retardant, and it is called "defect-free board" abroad. The middle base material part is medium density board, the density cannot be lower than 0.80g/cm3, otherwise it will affect the bearing capacity and flatness; the moisture content cannot be lower than 6.5%, but it cannot be too high, otherwise it cannot be adjusted according to climate changes; Surface technology, touch with your hand to distinguish whether it is embossed or flat. The embossed surface is better; the formaldehyde emission is 1.1mg/L, reaching the European E1 standard, and there is a test report. Be wary of particleboard and dyed moisture-proof board. In addition, the good board has the functions of anti-termite and anti-mildew.

2. Plate anti-counterfeiting: There are brand logos on both sides of the embossed plate and the position of the edge.

3. Smell the odor and soak in water test (if it rises too fast or does not rise, it must be disabled).

4. Edge banding: Whether it is smooth, delicate and strong adhesion (fake and inferior craftsmanship should be careful to peel off).

5. The surface and the inside should be the same: look at the material in the side plate hole. Of course, be careful of the materials inside the cabinet side panels, solid panels, and laminates (sealing on all sides) that are not perforated.

6. Standard specification panels: Only with standards can the craftsmanship and accuracy be guaranteed.

7. Material of aluminum alloy sliding door frame material: the cross section is bright and smooth without burrs, and the minimum wall thickness is 1.1mm;

8. Whether the key hardware accessories are marked with their own brand anti-counterfeiting logos, and their weight (such as drawer guides, etc.) must be weighed.

9. Push and pull to listen to the sound to judge the quality of the pulley, but it does not mean that the smaller the sound, the better (it may be engineering plastic or nylon); whether the upper rail guide wheel has an adjustment function.

10. In short, understand the samples carefully to prevent consumption traps.